Do a final walkthrough by bringing the right paperwork, checking the home in a fixed order, documenting anything that could be disputed, and returning the keys and access items the way the instructions require. Clean out what’s left, test the basic systems while you’re still there, and keep proof of what the place looked like when you handed it back. That gives you the best chance of avoiding deposit delays or a closing handoff problem.
What to have ready before you start
Bring the paperwork and a few basics so you can finish the walkthrough in one pass.
- Your lease, move-out instructions, sale paperwork, or closing handoff checklist
- A charged phone or camera for photos and video
- A notepad or notes app for damage, meter readings, and return items
- The keys, garage remotes, fobs, and access cards you expect to return
- A trash bag for anything you still need to remove
- Cleaning supplies for quick touch-ups, if your move-out instructions allow that
- A copy of your move-in condition report or other earlier photos, if you have them
If you got a checklist from a landlord, property manager, or buyer, keep it in hand and follow it unless the layout makes a different path easier. The goal is to avoid backtracking and to leave nothing unreviewed.
How to check each room in the right order
Start at one end of the home and move through it in a fixed path so you do not miss a room. A common route is entryway, living areas, bedrooms, bathrooms, kitchen, then storage areas, balcony, garage, or utility space if those are part of the property.
- Stand in the doorway and look over the room before you touch anything.
- Check the ceiling, corners, and trim for stains, cracks, holes, peeling paint, or water marks.
- Look at the walls for scuffs, nail holes, dents, marks behind furniture, or patched areas that still need attention.
- Inspect the floors for scratches, chips, stains, torn carpet, loose boards, or damaged tile.
- Check windows and sills for broken latches, cracked glass, missing screens, or leftover residue.
- Look at closets and built-ins for shelf damage, missing hardware, or items left inside.
- Check any fixtures in the room, such as light covers, vents, curtain rods, blinds, or shades, if they belong to the unit.
Pause long enough in each room to compare what you see with your move-in record, if you have one. If something looks worse than ordinary wear, photograph it before you move on.
What to look for on walls, floors, appliances, and fixtures
Pay extra attention to the items that most often lead to charges or delays.
- Check walls and trim for fresh marks, holes, missing covers, loose hardware, and patch work that was not finished.
- Check floors for visible damage in open areas and in corners where furniture may have hidden wear.
- Look over appliances from the outside first. Check the stove, oven, refrigerator, dishwasher, washer, and dryer for dents, missing knobs, broken shelves, stains, residue, or any part that is damaged or missing.
- Check sinks, tubs, showers, and toilets for chips, cracks, standing water, slow drainage, leaks, or signs of moisture under or around them.
- Look under sinks and around appliance hookups for water stains or damp spots that may not have been obvious during daily use.
- Test lights, switches, fans, built-in lighting, thermostats, and HVAC controls while you are in the room so you can tell whether they work as expected.
- Open and close interior doors, closet doors, and exterior doors, and check that locks latch properly.
- If blinds, shades, screens, or garage door controls are part of the property, check them for bent slats, broken cords, loose hardware, or other visible damage.
If an appliance or control has model-specific instructions, use the owner’s manual or the property’s written directions instead of guessing how it should work.
How to document damage, wear, and meter readings
Take clear photos and short video before you leave the home, especially if anything could be disputed later. Get a wide shot that shows where the issue is and a close-up that shows the detail.
Document:
- Existing wall damage, stains, or holes
- Scratches, burns, chips, or other floor damage
- Broken hardware, missing parts, or damaged appliance pieces
- Areas that still need cleaning or repair
- Any item left behind, with the room and location noted
- Final meter readings, if you are able to access them and are supposed to record them
Write down meter readings exactly as shown and label each one clearly, such as gas, electric, or water, if that applies to your property. If the meter is not easy to reach or you are not supposed to access it, note that and use the handoff instructions instead of forcing it.
Keep your files organized by room or by issue. That makes it easier to match your notes to the final checklist if a landlord, manager, buyer, or closing team asks about a specific spot later.
What to clean or remove before the walkthrough
Do one last sweep before you hand over the keys.
- Remove trash, food, and personal items from the home, including closets, drawers, cabinets, the refrigerator, and any storage area tied to the property.
- Clean the home to the level required by your lease, sale agreement, or move-out instructions. That may mean wiping counters, sweeping or vacuuming floors, and clearing obvious residue, but follow the written instructions you were given.
- Finish any agreed small repairs, and make sure you have not left behind tools, patch materials, or supplies.
- Check that nothing is left in places people often forget, like the top shelf of a closet, a bathroom drawer, the oven, the freezer, the garage, or a balcony storage bin.
- Do not leave behind anything you still control unless the written instructions say to do that.
How to handle keys, garage remotes, and access cards
Gather every access item that belongs to the property: keys, garage remotes, fobs, mailbox keys, parking passes, gate cards, and access cards.
Count them so nothing gets left in a pocket, a drawer, or a car console. Separate what stays with you from what must be returned, and keep the return items together until the handoff.
Follow the written return method exactly. Some landlords or managers want items handed over in person, while others want them left in a lockbox or mailed to a listed address. If the instructions do not tell you to leave an access item behind, do not do that.
What proof to keep after you leave
Ask for something in writing that shows the walkthrough happened and records the condition at handoff. That can be a signed checklist, an email, a text message, or a form from the landlord, property manager, buyer, or closing team.
Make sure the record includes the date, the condition noted at the walkthrough, and any items that still need attention. If someone points out an issue, write down exactly what they said and what you agreed to do next, if anything.
Keep copies of your photos, video, notes, meter readings, and the written confirmation after you leave. Save them somewhere you can find later, since they are your best proof if a deposit dispute, damage claim, or closing question comes up.
Conclusion
You know the walkthrough went well when the home has been checked in order, any issues have been documented, all required cleaning and removal is done, the access items have been returned as instructed, and you leave with written proof of the handoff.